8 Inch Galvanized steel inside gutter hangers 16 Gauge 1 box of 100



8 Inch Galvanized steel inside gutter hangers. Should work with 8″ (og) K style or 8″ commercial box gutter 1 box of 100.

Stainless Steel Equipment Grill Stand Table with Adjustable Undershelf 30×72




Stainless Steel Equipment Grill Stand with Adjustable Undershelf 30″x72″. Heavy Duty 18 Gauge Stainless Steel Table top. Undershelf galvanized steel is fully adjustable. Surface Height is 24. 1 Lip is wrapped around 3 sides of the equipment stand. Feet have adjustments to handle uneven floors.

1-1/2 Utility Pressure Gauge, WOG, Black Steel Case, 1/8 NPT, Center Back M





DuraChoice Brand Dry Utility Gauges are some of the best in the business. Wrapped in a black steel case and featuring a glass window, these dry gauges are as rugged as any in the market today at a fraction of the cost. Our selection ranges from vacuum to 6,000 psi. The gauges can be used to measure pressure in water, oil, gas and diesel, among other media. DuraChoice dry gauges are designed with visibility in mind. The dual scale gauges are highly legible, with black and red numbering on a white face. 1-1/2 Dial Size (Crimped Casing). Dual Scale – PSI / Bar. No material will be accepted without proper return authorization clearly marked.

Stainless Steel 15×17 Wall Hung Hand Washing Sink with Splash Guard & Knee Pedal



Side Splashes To help limit possible contamination, two 18-gauge type 304 stainless steel side splashes are included with the sink. This added protection allows you to place the sink closer to work counters and other high-traffic areas without worry. Removable Drain Basket For proper drainage, a removable 1 1/2 IPS drain basket is included to eliminate the possibility of drain clogging. By regularly maintaining your drainage system, you will cut down on possible service and replacements costs. Gooseneck Faucet is included for excellent reach and clearance. The added height will provide sufficient space for comfortable hand washing. Knee Pedals To activate Hot and Cold Water.

3 Stage 20×4.5 Big Blue Spin Down Sediment Whole House Water Filter System Set


SimPure SPWH-3S 20″ x 4.5″ 4 Stage Filtration Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – Spin Down Sediment Filter – Sediment Filter Cartridges, GAC Filter, Carbon Block – Whole Home Water Filters Portable Steal Frame. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Spin Down Sediment Pre-filter: – With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. As the filter can keep the particles out of the pipes and plumbing fixtures, you don’t also need to spend on heavy repairs and parts replacements. It means less maintenance on your part. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc. The Whole House Water Filter is supplied with 1″ Male NPT, 3/4″ Female NPT and 3/4 Male NPT. It is suitable for ANY THREADED CONNECTOR with 1″ Female NPT or 3/4″ Male NPT or 3/4 Female NPT. Including an extra 200? M filter element for free. 40? M filter will capture most particulates, it’s best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200? M filter element. Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has. 1 female National Pipe Thread Taper (NPT). Threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Our 3-stage whole house system offering. Up to 150,000 gallons. Of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of. While the sediment filter&GAC filter can last for. The duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. PP+GAC+CTO 20″X4.5″ 3-Stage Filter: – As the original replacement filter set for the SimPure SPWH-3S, they also fit 3 stage water filter systems and clean or blue big 20 housings including iSpring WGB32B, WGB22B WGB12B, HB28B, BBFS-222, WH300SCGS, Geek-Pure BB-20T, BB-20B, 150233, 166201, etc. Stage 1: Spin Down Sediment Pre-filter. Keep the particles out of the pipes and plumbing fixtures. Stage 2: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 3: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 4: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc – Double O-Ring ensure watertight seal – Three accessible pressure release buttons for easy filter change – Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them – Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket. 3x Pre-Installed Filters (PP sediment+GAC+CTO filters). 2x Plastic Expansion Nail. 6x Installed O-rings (2 in each housing). 1x Punch Positioning Sticker. 3-Stage System+Spin Down Filter. 1x SPWH-3S 3-Stage Whole House System. 1x Spin Down Sediment Pre-Filter (40 Micron+200 Micron). Not all of the items are included in the package, please choose the “Item Model” you need in the selection. Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean. SERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.

Meite 20 Gauge 1/2-Inch Crown Stainless Upholstery Staples Anti-Rust (5,000)












Brad Nailer & Finish Nailer. Concrete and Steel Nailer. Brad Nails & Finish Nails. Meite MT7116LN 22GA 3/8” Crown Air Long Nose Stapler Power Upholstery Stapler. Meite MT8016 21 Gauge 1/2” Crown Pneumatic Fine Wire Stapler Upholstery Stapler. Meite SC7-15GA C Ring Staples by 15 gauge C ring tools C ring gun C ring pliers. 118Ga Brad Nails Leg Length 2-Inch Galvanized Brad Nails Finish Nails Fasteners. SOLARY IR1 Infrared Dryer 110V Infrared Paint Curing Lamp Car Repair Lamp Dryer. 20 Gauge 1/2 Crown Stainless Steel Upholstery. Staples Rust- Resistant 50 Type. [Fastener] 20 Gauge 1/2” wide crown (12.5 mm crown) in stainless steel staples. [Length] 1/4″ (6 mm) length, 3/8″ (10 mm) length, 1/2 (12 mm) length. [Pack Quantity] 5,000 pcs/ box; 10 boxes/ case. [Compatible Tools] Mpst of 20 gauge 1/2-inch crown upholstery staplers, such as meite MT5016S, MT5016SLN. [Applications] For upholstery, furniture, many types of wood working. For indoor/outdoor use, but not suitable for boating or marine environment. Meite MT5016S 20 GA 1/2” Crown Pneumatic Fine Wire Stapler for Upholstery. Meite 7116B 22GA 3/8-inch Crown Pneumatic Upholstery Stapler Fine Wire Stapler. Meite MT7116S 22GA 3/8 Crown Air Upholstery Stapler with Safety air Staple Gun. Meite MT7116 22GA 3/8” Crown Pneumatic Upholstery Stapler Air Power Stapler. All questions or messages will be replied within 24 working hours.

22-Gauge Steel Bender with 6 Dies Sheet Metal Bead Roller Machine NEW












22-Gauge Steel Bender with 6 Dies Sheet Metal Bead Roller Machine NEW. 7” Sheet Metal Bead Roller Steel Bender 6 Die Sets Stability Smooth Low Carbon. 7 inch (177 mm) throat bead roller former, constructed with plate steel and owns a capacity of 0.03 inch (0.8 mm) (mild steel), is ideal for sheet metal strengthening. Throat Depth: 7 in (177 mm). Capacity: 22 Gauge (0.030/0.8 mm) mild steel. Material Stop Range: 0-7 in (0-177 mm). Thickness Mounting Surface: 2 in (50 mm). Die Sets: 6 sets. Application: Performs burring, edging, elbowing, flanging, flattening, and turning. Great for metal sheets such as vehicle floor pans, trunk pans and firewalls. Ideal for sheet metal fabrication shops and automotive industry. 1 x Bead Roller Sheet Metal Forming. 6 Sets of Dies. 6 die sets to fulfill multiple function into one machine, includes beading, wiring, flanging, elbow bending, crimping and ogee beading functions. Efficient and quick work is guaranteed by the gear drive, which is already installed in the bead roller for effortless work and labor saving. The bead roller is of light weight and simple construction, which enables easy alignment. Clamp attached for table mount. Easy operation, high precision as well as work timing reduction. Sheet metal bead roller calls for manpower operation. Working speed is all at your control. Pausing at any time is supported. Much more free and safer than electric models. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. 0-7 in (0-177 mm). 2 in (50 mm). Performs burring, edging, elbowing, flanging, flat. 7 in (177 mm). 22 Gauge (0.030/0.8 mm) mild steel.

Stainless Steel Food Prep Work Table 18×96



Stainless Steel Food Prep Work Table 18″x96″. Heavy Duty 18 Gauge Stainless Steel. Undershelf is galvanized Steel and is fully adjustable. Table height is 35. Include 6 legs with adjustable bullet feet.

OSHER SNYDER IOL CUTTING SCISSOR 18 GAUGE & FORCEPS 22 GAUGE SET, 4 piece


“SS NEW-VITREOUS OSHER SNYDER IOL CUTTING SCISSOR 18 GAUGE & FORCEPS 22 GAUGE SET “. Material – Made in Stainless Steel / SS. Description – VITREOUS OSHER SNYDER IOL CUTTING SCISSOR &FORCEPS SET. OSHER SNYDER IOL FORCEPS USED DURING IOL CUTTING MADE OF STAINLESS STEEL 22 GAUGE FOR HOLDING IOL WHILE CUTTING IT INSIDE THE CAPSULAR BAG INCISION SIZE 1.1 MM /22 GAUGE. OSHER SNYDER IOL CUTTING SCISSOR IOL CUT SERRATED IOL SCISSOR 18 GAUGE WITH CUTTING OF 1.2 MM FOR CUTTING ACRYLIC AND SILICONE IOLS THROUGH INCISION OF 1.9 MM/ 18 GAUGE. ONLY 2 TWO PISSES -SCISSOR & FORCEPS. We are one of the prime manufacturers, exporters & suppliers of Ophthalmic Surgical Instruments, E. T Instruments and Spectroscopy Instruments with excellence in quality of the products.
