25 Pack Liquid Filled Pressure Gauge 0-60 Psi, 2.5 Face, 1/4 Npt Lower Mount
NEW LIQUID/GLYCERIN FILLED AIR PRESSURE GAUGE. 5″ FACE WITH 1/4″ MALE NPT CONNECTION. High Quality Line Of Liquid Filled Gauges. Helps Dampen The Effects Of Pulsation And Vibration, While Also Perpetually Lubricating. The Movement (And Keeping Contaminates Such As Dirt Away From All Moving Parts). Which Will Extend The Life Of The Gauge. This gauge has been specifically designed with the original equipment manufacturers in mind and are typically used on hydraulic & pneumatic systems as well as any commercial or industrial application not corrosive to brass and bronze wetted parts where glycerine filling is suitable for use. Stainless Steel Case And Bezel. Copper Alloy Internals & Brass Connection – Phosphor Bronze Bourdon Tube – Plastic Lens Standard – Glycerine Filled. IMPORTANT: DO NOT DETERMINE YOUR PIPE THREAD SIZE WITH A TAPE MEASURE OR RULER. PIPE THREADS FOLLOW THE NPT (NATIONAL PIPE THREAD) GUIDELINES AND CANNOT BE ACCURATELY CALCULATED W/ A LINEAR MEASURING TOOL. EXAMPLE: 1/4 NPT MEASURES. 505 ON A TAPE MEASURE. THIS IS NOT DEEMED A LEAD FREE FITTING. THIS GAUGE IS NOT RATED FOR POTABLE WATER APPLICATIONS. We would be more than happy to correct any issue. Regardless if we accidentally sent you the wrong item (which seldom happens) or the customer ordered the wrong part by mistake. WE WILL correct any potential problem. Liability: UPE_Group is a dstributor and as such, has no direct or indirect control over the materials, processes, or quality control procedures used by the manufacturers of the products we resell. Accordingly, UPE_Group will NOT be held responsible for damages resulting from product defects, or, from mis-applications/improper installations by the customer or end user. It is the purchasers responsibility to determine the suitability of the product for the specific application. If it is deemed defective, UPE_Group shall be held harmless of any and all damages including (but not limited to) physical injury, property damage, water damage or otherwise for any reason. It is the purchasers responsibility to determine the suitability of these products for your specific application. Including, but not limited to, using alternative products. UPE_Group shall be held harmless of any and all damages including but not limited to physical, property, water or otherwise for any reason. Your use of any information or materials on this listing is entirely at your own risk, for which we shall not be liable. By submitting your order, the purchaser acknowledges agreement with the Terms & Conditions as outlined here and our website. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Pressure Gauges”. The seller is “upe_group” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Brand: PIC
- Material: Stainless Steel Case with Copper Internals
- Mounting Position: Side/Bottom Mount
- Face Diameter: 2.5 in (63 mm)
- Connection Diameter: 1/4 in
- Degree of Accuracy: 2-1-2% of Span
- Maximum Pressure: 60 psi (4.1 bar)
NEW 20 Gauge REMINGTON 870 Wingmaster 24578 20 Smooth Bore IC RS 3 Mag Barrel
BRAND NEW IN BOX, tape cut open, and removed ONLY for pictures. Has NEVER Been installed on a gun! REMINGTON Model 870 WING MASTER, pump action, 3 Mag Chamber, 20. Gauge, gloss blued finish, 20 long, smoothbore, fixed improved cylinder choke, deer slug shotgun barrel. Chambers both 2 & 3/4″ and 3″ Magnum length shells. Bore is excellent, needs to wiped from factory test firing and production residue. “EA” Barrel date code indicates an October, 2006 production date. Great barrel for your deer hunting, bear hunting, boar hunting, or other big game hunting needs. Would also make a good home defense, home protection, or home security barrel. Barrel includes only what is shown in pictures, nothing more, nothing less. WHAT YOU SEE IS WHAT YOU GET. ORIGINAL “AS-FOUND” CONDITION ITEMS, JUST. THE COLD, HARD, NAKED. Check out my other auctions for other rifle and shotgun barrels as well as additional gun parts. No excuses, no exceptions! This item is in the category “Sporting Goods\Hunting\Gun Parts\Shotgun Parts”. The seller is “books-r-great” and is located in this country: US. This item can be shipped to United States.
- For Gun Make: Remington
- Model: 870
- Country/Region of Manufacture: United States
- Custom Bundle: No
- Material: Steel
- Type: Barrel
- Features: Deer Barrel, Slug Barrel, Slugger Barrel, Home Defense, Home Protection, Home Security, 20 Gauge, 3\
- Specific Part: Barrel
- Color: Blued Steel
- Vintage: Yes
- MPN: 24578
- For Gun Type: Shotgun
- Gauge: 20
- Chamber: 3\
- Item Length: 20\
- Bundle Listing: No
- Non-Domestic Product: No
- For Gun Model: 870 Wingmaster
- Modified Item: No
- Brand: Remington
- Gauge/Caliber: 20 Gauge
Z Scale Z Gauge Märklin 81835 Meet Me in New Orleans Two Train Ready to Run Set
Z Scale Z Gauge Märklin 81835 Meet Me in New Orleans Two Train Ready to Run Set. Z Scale / 1:220. Prototype for the 1st train: 1 Southern Pacific “Mikado” steam locomotive with a tender. 1 Tennessee Central gondola. 1 Burlington Route hopper car. 1 Seaboard Air Line Railroad boxcar. 1 Southern Pacific caboose. Prototype for the 2nd train: 1 Southern Railway F 7 A unit diesel locomotive. 1 streamliner baggage car, 1 streamliner passenger coach, 1 streamliner dining car, 1 streamliner observation car, all painted and lettered for the Southern Railway. Model: Both locomotives come with 5-pole motors. All driving axles powered on the steam locomotive, both trucks powered on the diesel locomotive. 26 sections of straight track, 20 sections of curved track, 2 electric turnouts, 4 electric curved turnouts, a rerailer, 2 control boxes, distribution strips, 2 power packs, and other hardware for wiring the layout. Track plan brochure included. Total length of the 1st train 385 mm / 15-1/8. Total length of the 2nd train 520 mm / 20-1/2. This set can be expanded with the 8194 SET track extension set or as desired. Original Box, Box has Shelfwear. Set is in New Unused Condition. Locomotives have been tested and are working. Please review the pictures, they are part of the description. The fine print: None. This item is in the category “Toys & Hobbies\Model Railroads & Trains\Railroads & Trains\Starter Sets & Packs”. The seller is “sumgai” and is located in this country: US. This item can be shipped to United States.
- Scale: Z
- Grade: C-9 Factory New-Brand New
- Type: Starter Set
- MPN: 81835
- Gauge: Z
- Brand: Märklin
Speedometer Instrument Cluster Dash Panel Gauges 2014 Atima BRAND NEW NA14
YOUR PART# MUST MATCH THE REPLACEMENT! Many vehicles have data (immobilizer data, anti-theft data, VIN#, mileage, etc) stored in the cluster iteself. If you install a used cluster in MOST vehicles (that is not your original cluster coded to that car) your CAR WILL NOT START! We are PROS at this and we will help you figure it out. If your cluster has failed and you need a replacement you have three options. How much does this service cost? Each model/year is different. How long will this take? Typically a 24 hour turnaround from date received. Send your original cluster to us. We clone the original cluster to our used – working cluster. Track Page Views With. Auctiva’s FREE Counter. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Gauges\Instrument Clusters”. The seller is “instrumentclusterstore” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Country/Region of Manufacture: Unknown
- Mileage: 0 Miles
- OE Spec or Performance/Custom: OE Spec
- Programming: May Be Required
- Surface Finish: Good
- Manufacturer Part Number: 248109HM0A
- Brand: Nissan
- Fitment Type: Direct Replacement
- Stock #: S99989 / NA14
- Warranty: 60 Day
WALBRO CARBURETOR REPAIR TOOL KIT 500-538 chain saw blower trimmer W gauges
WALBRO CARBURETOR REPAIR TOOL KIT GENUINE OEM PART NUMBER 500-538. Improved welch plug installation tool. We added a recess machining to the press end. Fits almost all of our carburetors. Installation tool for our “bath tub” shaped welch plug. Shown here assembled as a handle on our new tool for removal of 84-613 and 615 check valves. These check valves are used on all our purge carbs. Upgraded welch plug removal tool. Also fits 95% of our carbs. Check valve installation tool for older Walbro carbs. Walbro LED 8x Magnifier. This high quality magnifier is retractable to protect the lens. And it has replaceable batteries. New reversible straight/Philips magnetic screwdriver. Slide hammer for removing older check valves and installing 84-613. Two Brass “W” Gauges. New metering lever height gauge for all Walbro models that are not on our old gauge. Metering lever height gauge for all older Walbro models. Feel free to contact me with any questions. Please check out my other listings. If your looking for other small engine parts not listed, please check with me. PLEASE DO NOT SEND PARTS BACK WITHOUT TALKING TO US FIRST. We will work with you on getting the right part for you, but we are not responsible for mistakes made on your end. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Chainsaw Parts”. The seller is “natewojo” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Type: carburetor repair tool kit
- Compatible Product: Chainsaw, Concrete Chainsaw
- MPN: 500-538
- Brand: Walbro
W PRO 5 Gauge Set GPS Speedometer with Tachometer 200 MPH Turn Signal High Beam
MOTOR METER RACING W PRO SERIES 5 Gauge Set. W PRO SERIES Brand New Speedometer & Tachometer 2 IN 1 Multi-Function Gauge. Analog Display Speedometer with Digital Display Odometer. Speedometer with Turn Signal & High Beam Function. High Quality Stepper Motor Movement. Convex Lens, 316 Stainless Steel Bezel with ABS Plastic Housing. Black Faceplate, Red Needle with White LED Illumination. With IP67 Waterproof, Rustproof, Anti-Fog & UV-Resistant. Odometer Records to 99999.9 Kilometres with Adjustable & Power Off Memory Function. Volt Gauge, Fuel Level Gauge, Water Temperature Gauge & Oil Pressure Gauge with Warning Function. Tachometer Fits Both Gas & Diesel Powered Engine. W PRO SERIES Gauge Set (Except Volt Gauge) Requires 12 / 24 Volt Negative Ground Systems. Volt Gauge Requires 12 Volt Negative Ground Systems. Volt Gauge / Voltmeter. Sizes: 52 mm (2-1/16). Measuring Range: 8 – 16. Measuring Range: Empty – Full. Resistance: 240 (E) – 33 (F) ohms. With Fuel Level Sender. Measuring Range: 40 – 120. / 100 – 250. With Water Temperature Sensor. Measuring Range: 0 – 10 (BAR) / 0 – 145 (PSI). With Oil Pressure Sensor. Sizes: 85 mm (3-3/8). Measuring Range: 0 – 200 (MPH). Measuring Range: 0 – 8000 (RPM). GPS Sensor & Harness. Water Temperature Sensor (Thread Size: 1/8 NPT). Oil Pressure Sensor (Thread Size: 1/8 NPT). Fuel Level Sender (240 – 33 ohms). 100% Made in Taiwan. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Gauges\Instrument Clusters”. The seller is “motormeterracing” and is located in this country: TW. This item can be shipped worldwide.
- Performance Part: No
- Country/Region of Manufacture: Taiwan
- OE/OEM Part Number: MM5GSETGPSSPB-200MPSPTA
- Unit of Measure: Volt, bar, Degrees Celsius, Degrees Farenheit, mph, psi, rpm
- Maximum Speedometer Value: 200 mph
- Vintage Car Part: No
- Type: Instrument Cluster
- Features: Illuminated (Backlit)
- Color: Black
- Manufacturer Part Number: MM5GSETGPSSPB-200MPSPTA
- Housing: ABS Plastic
- Lens: Convex Clear Lens
- Working Voltage: 12 / 24 V
- Universal Fitment: Yes
- Fuel Level Resistance: 240 – 33 ohms
- Brand: MOTOR METER RACING
- Manufacturer Warranty: 1 Year
- Needle Color: Red
- Speedometer Signal: GPS Based
- Bezel: 316 Stainless Steel
- Backlit: White LED
- Display Type: Analog, Analog & Digital
- Item Diameter: 85 mm & 52 mm
- Items Included: Volt Gauge, Installation Manual, Fuel Level Sender, GPS Sensor, Fuel Gauge, Lines, Oil Pressure Gauge, Speedometer, Tachometer/Rev Counter, Temperature Gauge