Generation 2 of our custom-manufactured fuel sender for the SAAB Classic 900 cars. Plug and play, no modifications to the car required. All new sender which replicates the fitment and function of the OEM senders. 304 Stainless Steel construction – Simple and durable reed switch electronics with NBR permanent magnet float being the only moving part. Note: reed switch sensors produce a “stair stepped” signal, rather than the continuous sweep on the gauge that the. Knowing this, we’ve spec’d the steps at a much finer range than normal, 7mm vs the typical 21mm fuel. NEW, larger 50mm diameter “damping cylinder” to minimize needle’bounce’. This is critical as our fuel tanks are NOT baffled. Includes low low level alarm for the instrument panel warning light, just like Saab specified. Viton gasket custom cut for us by Jay Turner Company in New Mexico, USA. NEW, 3D-printed, 3-spade connector housing custom made for us by Modern Classic Saab in Connecticut, USA. Just drop it in. If you’re thinking it just can’t be that simple, well that’s ok, reach out to us for assistance. Mounts the same as the OEM sender using your existing threaded cap, and prewired to match your 900’s OEM wiring harness. Every sender is quality inspected and tested, electrical connections installed, and packaged with genuine Saab luv. Install at your own risk. Our liability limited to the price of the product. Standard legal stuff here.