blue

3 Stage 20x4.5 Big Blue Spin Down Sediment Whole House Water Filter System Set

3 Stage 20x4.5 Big Blue Spin Down Sediment Whole House Water Filter System Set
SimPure SPWH-3S 20″ x 4.5″ 4 Stage Filtration Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – Spin Down Sediment Filter – Sediment Filter Cartridges, GAC Filter, Carbon Block – Whole Home Water Filters Portable Steal Frame. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Spin Down Sediment Pre-filter: – With SimPure Whole House Spin Down Sediment Pre-filter, you can have peace of mind that it can purify the water coming into your home. As the filter can keep the particles out of the pipes and plumbing fixtures, you don’t also need to spend on heavy repairs and parts replacements. It means less maintenance on your part. And it can also provide positive protection for the downstream pipeline, water purifier, water heater, wall hung gas boiler, wash machine, shower, and other terminal water equipment. This filter system works with Whole-house Water Filtration Systems, Undersink Water Filtration Systems, RO Systems. Including with SimPure DB10/DB20/DB1025, Culligan(WH-HD200-C, HD-950A, HF-360A), Pen-tek 10 BB filter housings, APEC HBB-10, DuPont WFPF13003B, GE GXWH20S, etc. The Whole House Water Filter is supplied with 1″ Male NPT, 3/4″ Female NPT and 3/4 Male NPT. It is suitable for ANY THREADED CONNECTOR with 1″ Female NPT or 3/4″ Male NPT or 3/4 Female NPT. Including an extra 200? M filter element for free. 40? M filter will capture most particulates, it’s best suited for use on Municipal (tap) or City water. If using it on Well, Lake feedwater, you can replace it with the 200? M filter element. Otherwise it may require more frequent flushing to remove the build-up of particulates due to the fine filter mesh used. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has. 1 female National Pipe Thread Taper (NPT). Threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Our 3-stage whole house system offering. Up to 150,000 gallons. Of clean water for a year for your family, it’s built for longevity. Features easy-to-change cartridges, transparent sediment housing, and pressure gauges. Enjoy benefits like no wastewater, consistent water pressure, chlorine-free showers, cleaner plumbing, and longer appliance life. Our 3-Stage water filter system consists of two NSF standard, the 1-stage clear PP housing allows you to monitor the filter cartridge usage at anytime, anywhere, making it more convenient than traditional blue filter housings. They are made of reinforced polypropylene for strength and resistance. And we’ve improved the thickness and durability of the filter bottles. You can confidently use it as a pre-filter for municipal or well water sources. Longer Lifetime: – The carbon filter has a lifetime of. While the sediment filter&GAC filter can last for. The duration depends on your water quality. With a 5? M filter pore size, it effectively removes sediment, rust, dust, and large impurities from the water, reducing odors, discoloration, and chlorine, resulting in improved taste. To ensure water quality and extend product lifespan, we recommend a water pressure of 25-90 psi and a temperature range of 41-100°F. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. PP+GAC+CTO 20″X4.5″ 3-Stage Filter: – As the original replacement filter set for the SimPure SPWH-3S, they also fit 3 stage water filter systems and clean or blue big 20 housings including iSpring WGB32B, WGB22B WGB12B, HB28B, BBFS-222, WH300SCGS, Geek-Pure BB-20T, BB-20B, 150233, 166201, etc. Stage 1: Spin Down Sediment Pre-filter. Keep the particles out of the pipes and plumbing fixtures. Stage 2: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles, etc. Stage 3: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 4: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc – Double O-Ring ensure watertight seal – Three accessible pressure release buttons for easy filter change – Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them – Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket. 3x Pre-Installed Filters (PP sediment+GAC+CTO filters). 2x Plastic Expansion Nail. 6x Installed O-rings (2 in each housing). 1x Punch Positioning Sticker. 3-Stage System+Spin Down Filter. 1x SPWH-3S 3-Stage Whole House System. 1x Spin Down Sediment Pre-Filter (40 Micron+200 Micron). Not all of the items are included in the package, please choose the “Item Model” you need in the selection. Q: Leaks between filter head and filter bowl of housing? A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections? A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button? A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time? A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge? A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey. A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean. SERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. Please contact our trained water specialists. And is available to answer any questions during the life of the product.
3 Stage 20x4.5 Big Blue Spin Down Sediment Whole House Water Filter System Set

3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal

3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal
SimPure SPWH-3S 20″ x 4.5″ 3 Stage Big Blue Whole House Water Filtration System (1 Inlet/Outlet Port) with Big Housings & Pressure Gauges – GAC Filter, Carbon Block, Sediment Filter Cartridges – Whole Home Water Filters Portable Steal Frame. SimPure SPWH-3S 3 Stage Big Blue Whole House Water Filter System. The SimPure SPWH-3S is a 3 Stage Whole House Filtration System(PP Sediment + GAC + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd-stage filter (GAC granulated activated carbon filter) can remove chlorine, chloramine, VOCs and etc. The 3rd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. With our instruction you can use and install SPWH-3S 3-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Pressure gauges help to monitoring your system and to know which filter you need to change and when. Remove the filters easily by the Pressure Release Buttons. The black cap has 1 female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. This SPWH-3S water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1 NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. The SimPure SPWH-3S Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Stage 1: PP Sediment Filter. Remove dirt, silt, sand, rust and scale particles , etc. Stage 2: GAC Filter. Remove chlorine, chloramine, VOCs, etc. Stage 3: CTO Filter. Remove chlorine, chloramine, VOCs, bad taste and odor, etc. Double O-Ring ensure watertight seal. Three accessible pressure release buttons for easy filter change. Three pressure gauges: Monitor your system’s performance, know which filters you need to change and when to change them. Standard 1 female NPT thread connections and long high efficiency housings for easy adaptability and high flow. Material: 100% food-grade ABS + Metal + Stainless Steel. Filter Size: 20 4.5 Inch. Filter Life (Months): 6 Month. Flow Rate (GPM): 15 GPM. Inlet/outlet Connection: 1 female NPT thread. Temperature Range: 41-100? (5-38?). Pressure Range: 25 – 90 psi. 1x SPWH-3S assembled housing kit with bracket. 3x Installed Filters(PP sediment+GAC+CTO filters). 2x Plastic Expansion Nail. 6x Installed O-rings (2 in each housing). 1x Punch Positioning Sticker. Q: Leaks between filter head and filter bowl of housing A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. A2: The O-ring may not be in place. Clean and lubricate O ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Q: Leaks from the pressure release button A: The pressure release button has a screw under the bracket. Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge A1: Make sure the plastic wrapper around the filter has been removed. Check the filter cartridge has not been installed incorrectly, especially the GAC filter, please look at the picture, this is the botttom side of the GAC filter. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high-flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.
3-Stage 20x4.5 Big Blue Whole House Water Filter System 1 NPT Port 100000 Gal

6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led
6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led
6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led
6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led

6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led
6 gauge set include 6 gauges: Speedometer, Tachometer, oil pressure, temp, fuel, volt meter. Speedometer and tachometer: This speedometer with left right turn signal and high beam White dial face, chrome bezel. 3-3/8 or 85mm mounting holes AMP 8-pin connector wiring. Touch-sense button to change the setup parameters. Easy setup for pulse/rev. LED back lighting, blue color at night. 2-1/16 or 52mm mounting holes LED back lighting, blue color at night. Input ranges: Oil pressure: 10-184ohms, show 0-145 PSI Fuel level: 0-90 ohms, E – F (for GM style). Temp: 287.4-22.4 ohms (low match).
6 gauge set with senders speedo tacho oil temp fuel volt white/chrome blue led

6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome
6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome
6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome

6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome
6 gauge set include 6 gauges: Speedometer, Tachometer, oil pressure, temp, fuel, volt meter. Speedometer and tachometer: This speedometer with left right turn signal and high beam Black dial face, chrome bezel. 3-3/8 or 85mm mounting holes AMP 8-pin connector wiring. Touch-sense button to change the setup parameters. Easy setup for pulse/rev. LED back lighting, blue color at night. 2-1/16 or 52mm mounting holes LED back lighting, blue color at night. Input ranges: Oil pressure: 10-184ohms, show 0-145 PSI Fuel level: 0-90 ohms, E – F (for GM style). Temp: 287.4-22.4 ohms (low match). 6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome. Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration. The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments. Function: instrument with stepper motor pointer, with polarity protection, but also with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration. This speedometer with left right turn signal and high beam. Black dial face, chrome bezel. 3-3/8 or 85mm mounting holes. AMP 8-pin connector wiring. For details, see speedometer description at link below. 2-1/16 or 52mm mounting holes. Oil pressure: 10-184ohms, show 0-145 PSI. Fuel level: 0-90 ohms, E – F (for GM style), (If you want a 0-30 ohms, 73-10 ohms and so on input, please leave a message during the check out so we can swap for you). Temp: 287.4-22.4 ohms (low match), show 100-250 F. Note: this gauge set doesn’t come with senders. For other gauge set with sender, see. We are committed to product quality and customer service. E-mails are answered Monday through Saturday. Please allow up to 24hours for a response to your message. 6 gauge set with sender. Fuel Gauge, Oil Pressure Gauge, Speedometer, Tachometer/Rev Counter, Temperature Gauge, Voltmeter, 3sender. Bar, Degrees Celsius, km/h, psi, rpm.
6 gauge set speedometer tacho fuel temp Oil pressure volt blue led black/chrome

6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome
6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome
6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome
6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome

6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome
6 gauge set include 6 gauges: Speedometer, Tachometer, oil pressure, temp, fuel, volt meter. Speedometer and tachometer: This speedometer with left right turn signal and high beam Black dial face, chrome bezel. 3-3/8 or 85mm mounting holes AMP 8-pin connector wiring. Touch-sense button to change the setup parameters. Easy setup for pulse/rev. LED back lighting, blue color at night. 2-1/16 or 52mm mounting holes LED back lighting, blue color at night. Input ranges: Oil pressure: 10-184ohms, show 0-145 PSI Fuel level: 0-90 ohms, E – F (for GM style). Temp: 287.4-22.4 ohms (low match). 6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome. 3 senders:oil pressure sender, temp sender, fuel sender. Use moving-magnet principle to drive the needle, featuring good endurance and anti-vibration. The main application areas: boats, construction machinery, vehicles, generators, engines, agricultural machinery for long-term use in humid environments. Function: instrument with stepper motor pointer, with polarity protection, but also with over voltage protection and the instrument can continue to work between 9-32V, the overall waterproof, anti-fog, anti-over-voltage and anti-vibration. This speedometer with left right turn signal and high beam. Speedometer with GPS antenna. Black dial face, chrome bezel. 3-3/8 or 85mm mounting holes. AMP 8-pin connector wiring. For details, see speedometer description at link below. 2-1/16 or 52mm mounting holes. Oil pressure: 10-184ohms, show 0-145 PSI. Fuel level: 0-90 ohms, E – F (for GM style), (If you want a 0-30 ohms, 73-10 ohms and so on input, please leave a message during the check out so we can swap for you). Temp: 287.4-22.4 ohms (low match), show 100-250 F. Oil pressure sender: 10-184ohms, show 0-145 PSI, 1/8NPT. Temp sender: 287.4-22.4 ohms (low match), show 100-250 F, 1/8NPT. Fuel level sender: 0-90 ohms, E – F (for GM style), 165mm length. Note: this gauge set come with senders, For other gauge set without sender, see. We are committed to product quality and customer service. E-mails are answered Monday through Saturday. Please allow up to 24hours for a response to your message. 6 gauge set with sender. Fuel Gauge, Oil Pressure Gauge, Speedometer, Tachometer/Rev Counter, Temperature Gauge, Voltmeter, 3sender. Bar, Degrees Celsius, km/h, psi, rpm.
6 gauge set with senders 200km speedo tacho oil temp fuel volt blue led Chrome

MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI

MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI
MOTOR METER RACING CLASSIC SERIES 6 Gauge Set. Swiss Stepper Motor Movement. Analog Display Speedometer with Odometer. Convex Glass Lens Surface, Stainless Steel Bezel with Plastic Housing. Blue Faceplate, White Needle. Speedometer Cable Thread Size: 5/8-18. Tachometer Fits Any 1 to 9 Cylinder Gas Powered Engine. Gauge Set Requires 12 Volt Negative Ground Systems. Measuring Range: 8 – 16 (V). Measuring Range: Empty – Full. Resistance: 240 (E) – 33 (F) ohms. With Fuel Level Sender. Measuring Range: 100 – 250. With Water Temperature Sensor. Measuring Range: 0 – 100 (PSI). With Oil Pressure Sensor. Measuring Range: 0 – 140 (MPH). Measuring Range: 0 – 8000 (RPM). Water Temperature Sensor (Thread Size: 1/8 NPT). Oil Pressure Sensor (Thread Size: 1/8 NPT). Fuel Level Sender (240 – 33 ohms). Filter x 2 (For Tachometer). Speedometer: 0 – 220 (KMH) / 0 – 140 (MPH). Fuel Level Gauge: 240 – 33 ohms / 0 – 90 ohms, Also Substitute Fuel Level Sender. Water Temperature Gauge: 40 – 120 (Celsius) / 100 – 250 (Fahrenheit). Oil Pressure Gauge: 0 – 7 (BAR) / 0 – 100 (PSI). MOTOR METER RACING GUARANTEE. 100% Made in Taiwan.
MOTOR METER RACING Classic Blue 6 Gauge Set Mechanical Speedometer MPH °F PSI

2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine

2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine
Speed odometer use stepping motor drive pointer, can show speed precisely, and also can show the mileage clearly with LCD display screen Specifications: This speedometer with left and right turn signals and high beam Name:GPS Speedometer Material:stainless steel 316L bezel+anti-fog glass Panel color:White Backlight color: Blue Fixing dimension: 85mm(3-3/8) Working voltage:932VDC Working current: =100mA Operating temperature: -30°75° Storage temperature:-40°85° Levels of protection: IP67 Indicating Range: 0200km/h Suitable for car truck boats off-roadvehicles boats. 2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine. 2 Gauge set:Speedometer and tachometer. Speed odometer use stepping motor drive pointer, can show speed. And also can show the mileage clearly with LED display screen. This speedometer with left and right turn signals and high beam. Material:stainless steel 316L bezel+anti-fog glass. Fixing dimension: 85mm(3-3/8). Levels of protection: IP67. Suitable for car truck boats off-roadvehicles boats. The adjustment range of speed ratio:0. This tacho must be hooked up to the “W” terminal on vehicle alternator. Many diesel engines and most inboard gas boat engine alternator have this connection. It can also be working with tachometer sender. Protection grade is IP67, the whole body is completely waterproof. 100% brand new and high quality. With polarity reverse protection function. The durability is good, and the seismic performance is good. Signal comes directly from the satellite signal receiver(GPS Speed Sensor). The gauge has the advantages of high precision, quick location confirmation and short start up time. With ultra-wide working voltage designlong-term operating voltage: 932V, Maximum up to:36V(= 1 min). Pls note:for this speedometer, we suggest buyers to connect gps antenna firstly and then connect power (can not connect power firstly and then connect gps antenna), otherwise it will be easy to make gps mould damaged. 1 x GPS speedometer. 1 x GPS Receiver. If you need other speedometer see. If you receive defective item, please kindly notify us within 30 days. We are factory that majored in all kinds of gauges, car parts and accessories. We also can offer DIY service per your request. Our offer was reasonal and fair. You are welcome to send a message to us for cooperation opportunities and we will reply timely as long as we can see it.
2 Gauge Set 200KMH GPS Speedometer 0-8000rpm Tachometer Blue LED for Car Marine

2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED

2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
Speed odometer use stepping motor drive pointer, can show speed precisely, and also can show the mileage clearly with LCD display screen Specifications: Name:GPS Speedometer Material:stainless steel 316L bezel+anti-fog glass Panel color:Black Backlight color: Blue Fixing dimension: 85mm(3-3/8) Working voltage:932VDC Working current: =100mA Operating temperature: -30°75° Storage temperature:-40°85° Levels of protection: IP67 Indicating Range: 0200KMH Suitable for car truck boats off-roadvehicles boats. 2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED. 2 Gauge set:Speedometer and tachometer. Speed odometer use stepping motor drive pointer, can show speed. And also can show the mileage clearly with LED display screen. This speedometer with left and right turn signals and high beam. Material:stainless steel 316L bezel+anti-fog glass. Fixing dimension: 85mm(3-3/8). Levels of protection: IP67. Suitable for car truck boats off-roadvehicles boats. The adjustment range of speed ratio:0. This tacho must be hooked up to the “W” terminal on vehicle alternator. Many diesel engines and most inboard gas boat engine alternator have this connection. It can also be working with tachometer sender. Protection grade is IP67, the whole body is completely waterproof. 100% brand new and high quality. With polarity reverse protection function. The durability is good, and the seismic performance is good. Signal comes directly from the satellite signal receiver(GPS Speed Sensor). The gauge has the advantages of high precision, quick location confirmation and short start up time. With ultra-wide working voltage designlong-term operating voltage: 932V, Maximum up to:36V(= 1 min). Pls note:for this speedometer, we suggest buyers to connect gps antenna firstly and then connect power (can not connect power firstly and then connect gps antenna), otherwise it will be easy to make gps mould damaged. 1 x GPS speedometer. 1 x GPS Receiver. If you need other speedometer see. If you receive defective item, please kindly notify us within 30 days. We are factory that majored in all kinds of gauges, car parts and accessories. We also can offer DIY service per your request. Our offer was reasonal and fair. You are welcome to send a message to us for cooperation opportunities and we will reply timely as long as we can see it.
2 Gauge Set 0-200KMH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED

2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED

2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED
Speed odometer use stepping motor drive pointer, can show speed precisely, and also can show the mileage clearly with LCD display screen Specifications: Name:GPS Speedometer Material:stainless steel 316L bezel+anti-fog glass Panel color:Black Backlight color: Blue Fixing dimension: 85mm(3-3/8) Working voltage:932VDC Working current: =100mA Operating temperature: -30°75° Storage temperature:-40°85° Levels of protection: IP67 Indicating Range: 0200MPH Suitable for car truck boats off-roadvehicles boats. 2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED. 2 Gauge set:Speedometer and tachometer. Speed odometer use stepping motor drive pointer, can show speed. And also can show the mileage clearly with LED display screen. This speedometer with left and right turn signals and high beam. Material:stainless steel 316L bezel+anti-fog glass. Fixing dimension: 85mm(3-3/8). Levels of protection: IP67. Suitable for car truck boats off-roadvehicles boats. The adjustment range of speed ratio:0. This tacho must be hooked up to the “W” terminal on vehicle alternator. Many diesel engines and most inboard gas boat engine alternator have this connection. It can also be working with tachometer sender. Protection grade is IP67, the whole body is completely waterproof. 100% brand new and high quality. With polarity reverse protection function. The durability is good, and the seismic performance is good. Signal comes directly from the satellite signal receiver(GPS Speed Sensor). The gauge has the advantages of high precision, quick location confirmation and short start up time. With ultra-wide working voltage designlong-term operating voltage: 932V, Maximum up to:36V(= 1 min). Pls note:for this speedometer, we suggest buyers to connect gps antenna firstly and then connect power (can not connect power firstly and then connect gps antenna), otherwise it will be easy to make gps mould damaged. 1 x GPS speedometer. 1 x GPS Receiver. If you need other speedometer see. If you receive defective item, please kindly notify us within 30 days. We are factory that majored in all kinds of gauges, car parts and accessories. We also can offer DIY service per your request. Our offer was reasonal and fair. You are welcome to send a message to us for cooperation opportunities and we will reply timely as long as we can see it.
2 Gauge Set 0-200MPH GPS Speedometer 0-8000rpm Tachometer for Auto Boat Blue LED